You were so right... I totally needed to make this! A pool chair cover with clever features at both ends to keep it on the chair, pockets to hold devices, sunscreen and keys, plus a PILLOW!
(Don't you think the 'reserved' towel that I used for the second one makes it seem all exclusive? Everyone at the pool will be afraid to steal my chair, lol!)
And, of course, it folds up into a fun tote that you can carry other stuff in too!
I designed these chair covers to fit the 22'' wide chairs that we have at two different pools in my area - the dimensions are the same as this one.
Because the back part is sewn with stretch knit fabric (don't worry, this is easy!), the cover is somewhat one-size-fits-all, unless your chairs are a lot bigger.
If your chair is smaller, you could tie the bag strap part tighter to secure it better.
There is an elastic piece at the bottom of the cover to hold it in place too.
And of course, lots of pockets! I made two zippered pockets and two slip pockets. These can be customized however you want.
The reason why I cut the towels to be narrow - just wider than the chair - is so that the pockets wouldn't touch the ground. Who wants their phone to hit the ground when the drop it in the pocket? Not me!!!
But my favorite part is the pillow pocket - I almost left that off until a reader commented about it. She was so right! The narrow pillow that fits snugly in the pocket is just the right size to cushion your neck and head. Trust me - it's perfect!
So let's get to it!
This tutorial begins with an extra long beach towel - the ones that I bought (from Target) were 36'' x 72''.
Tip: Towels as narrow as 24'' will work fine (you won't need to hem the sides). If your towel is longer or shorter than 72'', some adjustment may be necessary at the bottom end - but it won't be difficult.
You will also need:
- 1 yard total of woven fabric (such as quilting cotton) for the pockets and pillow. I used different fabrics for these so I could use up scraps.
- 1 yard of stretch knit fabric (if it's 48'' or wider, there will be enough left over for a second cover)
- 24'' of 1'' wide elastic
- 2 zippers, at least 13'' long (I used wide handbag zippers - but regular zippers are fine too)
- polyester fiber-fill for the pillow
In case your fabrics are directional, all dimensions are height x width.
From regular (woven) cotton fabric, cut:
- 1 strip 8'' x 28'' (to make the pillow)
- 1 rectangle 11'' x 16'' (to make the pillow pocket)
- 2 rectangles 18'' x 13'' (for the zippered pockets)
- 2 rectangles 18'' x 8'' (for the slip pockets)
- 2 strips 5'' x 20'' for the bag strap - these can either be cut from new fabric or you can use scraps cut from the sides of the towel like I did - see below.
From stretch knit fabric, cut:
- 1 rectangle 30'' x 24''
Tip: make sure you cut this piece so that the fabric stretches in the direction shown to the right.
If your fabric has 4-way stretch, this won't matter.
Cut the towel so that it is 26'' wide (or 4'' wider than your pool chair). Since my towels had a design on both of them, I cut 5'' from each side to preserve the design.
Leave the hems on the top and bottom edges of the towel.
I cut my 5'' x 20'' bag strap pieces from these scraps.
Make the Pillow:
1/2'' seam allowance allowed.
1. Fold the 8'' x 28'' rectangle in half with the short ends right sides together.
2. Sew around the 3 sides, leaving a 4'' opening for stuffing. Clip the corners.
3. Turn the pillow right sides out. Stuff to desired firmness with polyester fiberfill.
4. Hand- or machine-sew the opening closed.
Make the Pillow Pocket:
1. Fold one long edge over to the wrong side 1/2'' and then again 1/2', and press. Stitch close to the fold to make a 1/2'' hem.
2. Press the remaining 3 edges over 1/2'' to the wrong side.
3. Pin the pocket upside down (with the hemmed opening at the bottom) 3'' below the top edge of the towel and centered.
4. Stitch the pocket to the towel around the 3 (not hemmed) edges, sewing 1/8'' from the edge.
Add the Elastic and Hem the Sides:
1. Flip the towel over, and pin the 24'' piece of elastic to the bottom end, on the back side of the towel. Center it so that it is 1'' away from each edge, about 1'' away from the bottom.
2. Sew a 1/2'' hem on each long towel edge, enclosing the elastic at the bottom.
Tip: since my towel was so thick, I found it more accurate to fold over about 1/4'', and then 1/2''. This used up about 1'' on each side because of the bulk in folding.
Make and Attach the Tie Straps:
1. Fold the 5'' x 20'' strips in half lengthwise.
2. Sew across one short end, pivot, and then sew down the long edge.
3. Clip the corners and turn the straps right side out.
4. Pin the raw edge end of the straps to the sides of the towel, 13'' below the top edge. Baste in place within the 1/2'' seam allowance.